Go into your computer’s sound settings and reselect the Blue Yeti as your default microphone to be sure.Once the restart is complete, plug the Blue Yeti back into the computer.Give it a few extra minutes before turning it back on to perform a hard reset. A simple restart can often fix the issue and allow your computer to recognize the Blue Yeti and work properly.įollow the steps below to perform a restart: Restart Your Computer and Plug in the Blue Yeti AgainĬomputers can sometimes become so clogged up with junk files that it will have a hard time detecting external devices. Check that there are no physical obstructions between the microphone and your mouth. You should also ensure that the microphone isn’t covered, as this can also mute it. If it’s dirty, use a can of compressed air to blow it away. If it isn’t, you will need to select it and then click “Apply.”Įnsure the microphone opening is clean and clear of dirt or metal shavings. Go back into your sound settings on your computer and make sure that the Blue Yeti is selected as your default microphone.The status light should illuminate a solid red, indicating that the mike is no longer muted. Press and hold the mute button for at least two seconds.If the mute button is flashing, the microphone has been muted and won’t pick up any sound until you unmute it. Look at your Blue Yeti Mic and ensure that it’s not muted. Sometimes the issue isn’t with your computer but with the microphone itself. The settings menu will vary depending on what operating system you’re using, but you should be able to find the volume settings easily in your computer’s control panel. Ensure that the Gain, Volume, and Headphone Volume knobs are turned up and that the Mute switch is off. You’ll also want to check your Blue Yeti’s internal volume settings. Ensure that the correct device is selected as your default sound input and output and that the microphone volume is turned up. If your computer detects the Blue Yeti but can’t hear any sound, the issue might be with your computer’s volume settings. If you don’t have any other USB cables, you can purchase one online or visit a local tech shop to see if they have some in stock. If you have another USB cable lying around, give it a try. The cable you’re using might be damaged or incompatible with the Blue Yeti, so swapping it out for a different one is a good troubleshooting step. If the Blue Yeti doesn’t work on a different computer or Mac, then the problem is probably with the microphone itself.ĭepending on the issue, you can try to get your USB port fixed or contact Blue Yeti customer service for a replacement microphone. If this works, the problem is most likely with your first computer’s USB port. If that doesn’t work, or if your computer only has one USB port, try plugging the Blue Yeti into a different computer. If your computer has several USB ports, try plugging the Blue Yeti into another and see if that helps. Some may be more powerful than others or not functioning correctly, so using a different port can sometimes do the trick. The sound settings may be a bit different in each operating system, but you should still be able to find the Blue Yeti microphone from the list of inputs. The process shouldn’t be too different on either Windows or Mac computers. If everything is working, then you’re ready to start streaming. Test it out by speaking into the microphone, and ensure you can hear your voice. Once you’ve done that, your computer should automatically detect the microphone when you run your streaming software. You should now see that your Blue Yeti microphone is set as the Default Device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |